Lab Spray Dryer Bilon-9000y Pilot Atomized Drying Machine (BILON-9000Y)

Lab Spray Dryer BILON-9000Y
Pilot Spray Drying Machine

This machine is an AIO machine, only need to turn on the power before experiment.

Principle
     After the filtered and heated, the air enters into the air distributor on the top of the drier. The hot air enters into the drying room in the spiral form and uniformly. By passing through the high-speed centrifugal spray on the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through the very short time of contacting the heat air, the materials can be dried into the final products. The final products will be discharged continuously from the bottom of the drying tower and from the whirl separator. The waste gas will be discharged from blower.

Features
1. The drying speed is high when the material liquid is atomized, the surface area of the material will increase greatly. In the hot-air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds. This is especially suitable for drying the heat sensitive materials.
2. Its final products own the good uniformity, mobility, dissolving capacity, and the final products are high in their purity and good in their quality.
3. The production procedures are simple and the operation and control are easy.
4. The liquid with the moisture contents 40-60 %( for special materials, the contents may reach 90%). Can be dried into the powder or particle products once a time.
5. After the drying, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity.
6. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope.
7. It is very convenient to carry out the control and management.

Applications
1. Chemical Industry: Sodium fluoride (potassium), alkaline dyestuff and pigment, dyestuff intermediate, compound fertilizer, formic silicic acid, catalyst, sulfuric acid agent, amino acid, white carbon and so on.
2. Plastics and resin: AB, ABS emulsion, uric acid resin, phenolic aldehyde resin, urea-formaldehyde resin, formaldehyde resin, polythene, poly-chloroprene etc.
3. Food Industry: Fatty milk powder, protein, cocoa milk powder, substitute milk powder, egg white(yolk), food and plant, oats, chicken juice, coffee, instant dissoluble tea, seasoning meat, protein, soybean, peanut protein, hydrolysate and so forth.
4. Ceramic: Aluminum oxide, ceramic tile material, magnesium oxide, and talcum etc.

Technical parameters